车载一体化工业计算机 VCM-110/111
7”带ARM®Cortex®-A9平台的移动数据终端
主要特点：
1、7”1024 x 600 TFT液晶显示器与电阻触摸屏
2、ARM®Cortex®-A9双核处理器，1GHz频率
3、紧凑无风扇设计
4、屏幕上的F1 ~ F5可编程功能键
5、Linux和Android操作系统
6、支持GPS/Wi-Fi/3G/LTE(包括航迹推算)
6、iButton & RFID用于身份识别
7、双CAN总线2.0B
8、OBDII (ISO15765-4)/SAE J1939协议
9、9 ~ 36V的大范围直流输入
10、用于Android平台功能演示的软件工具
11、CE / FCC / Emark
7”带ARM®Cortex®-A9平台的移动数据终端
主要特点：
1、7”1024 x 600 TFT液晶显示器与电阻触摸屏
2、ARM®Cortex®-A9双核处理器，1GHz频率
3、紧凑无风扇设计
4、屏幕上的F1 ~ F5可编程功能键
5、Linux和Android操作系统
6、支持GPS/Wi-Fi/3G/LTE(包括航迹推算)
6、iButton & RFID用于身份识别
7、双CAN总线2.0B
8、OBDII (ISO15765-4)/SAE J1939协议
9、9 ~ 36V的大范围直流输入
10、用于Android平台功能演示的软件工具
11、CE / FCC / Emark
VCM-110/111，一个7英寸的移动数据终端，目标是车队管理、运输和物流应用。其紧凑、坚固的设计和灵活的扩展能力是完美的驱动器上的有限空间和频闪要求的无线通信。对于无线通信，VCM-110/111支持GPS、航迹推算、Wifi、3G和LTE。此外，VCM-110/111同时支持Android和Linux操作系统，这是未来操作系统的主流。7”1024 x 600分辨率，500nits亮度和电阻式触摸，适用于驱动机柜。丰富的I/O支持，如2 x CAN总线2.0B, OBDII/J1939, RS232, RS485, USB, GPIO, LAN…VCM-110/111基于Android和Linux平台，无疑适用于各种卡车、叉车、起重机…在港口、运输和物流方面的应用。
| LCD Panel | 7-inch TFT LCD Panel with LED Backlight1024 x 600 pixelsBrightness: 500 cd/m² (typical)Contrast ratio: 800:1 (typical)Viewing angle: 150(H), 145(V) |
| Touch Screen | 4-wire resistant touchAnti-glare coating surfaceTransmission rate: 80% ± 3% |
| CPU & Chipset | ARM® Cortex®-A9 Processor with 1GHz frequencyFreescale Dual Core |
| Memory | On-board DDR3L 2GB |
| Storage | 1 x Micro SDHC SlotEMMC: 8G on board |
| Expansion | 1 x half-size mini-PCIe (PCIe + USB) for WLAN1 x full-size mini-PCIe (USB + UART) for WWANOBDII: ISO15765-4 & SAE J1939 (Default: None, BOM optional)RFID (optional) |
| I/O Interface-Front | F1 ~ F5 programmable function keysLight SensorInternal Mic-in2 x Built-in 2W speakers3 x LED indicators (Power, Storage and WWAN) |
| I/O Interface-Lateral |
Right side - 1 x SIM card slot - 1 x Micro SD card slot - 1 x USB 2.0 type A - 1 x micro USB OTG for maintenanceLeft side - 1 x Power button - 1 x Volume up/down - 1 x Brightness up/down - 1 x System reset button |
| I/O Interface-Rear/Bottom |
1 x lockable power input with ignition1 x RJ45 for LAN2 x USB 2.0 Type A - DB-15 connector - Full RS-232 - RS-232/485 - CAN1 2.0BDB-15 connector - GPI x 3 Sink type: 5VDC TTL (default) Source type: 3 ~ 28VDC - GPO x 3 Sink type: 5VDC TTL (default), max current: 20mA Source type: 3 ~28VDC, max. current: 150mA - GPS DR (Speed, direction, GND) - CAN2 2.0B (Default) & (BOM optonal for OBD II (ISO 15765-4 & J1939)) - iButton1 x Mic-in1 x Line-out3 x Antenna on I/O - Rear: 1 x GPS, 1 x WWAN - Bottom: 1 x GPS, 2 x WWAN2 x Antenna on housing for Wi-Fi |
| Mechanical | Cooling System: FanlessEnclosure: Plastic PC/ABS + Metal heat-sinkMounting: VESA 75/100 & Desktop mountingIngress Protection: Front panel IP54Dimension: 212.9mm (W) x 144.97mm (H) x 40mm (D)(8.4" x 5.7" x 1.6")Weight: 1.3kg |
| Power Management | 9V~36V DC inputSelectable boot-up & shut-down voltageIgnition: 8-level delay time on/offReverse protection/over-voltage protection/low-voltage protectionWake up by SMS/RTC/ignition |
| Operating System | Linux YOCTO 2.0 by RequestAndroid 5.1 |
| Environment |
Operating temperatures: Ambient with air -20°C to 70°CStorage temperatures: -30°C to 80°CRelative humidity: 10% to 90% (non-condensing)Vibration Vibration test: IEC 60068-2-64, 2.5G Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4 Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24Shock MIL-STD-810G, 516.6 Procedure 1, trucks and semi-trailers=40g Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g |
| Certification | CE/FCC class B/E-Mark |
VCM 110 (P/N: 10VC0110005X0)
VCM 110-D1A 7" I/O on the back w/i.MX6 Dual Lite, 2GB, 8G EMMC, 4w T/S, Android
VCM 111 (P/N: 10VC0111000X0)
VCM 111-D1A 7" I/O on the bottom w/i.MX6 Dual Lite, 2GB, 8G EMMC, 4w T/S, Android